[root] Mobile ODIN Pro

Mobile ODIN is the on-device firmware flasher of choice. Just throw those firmware files on your (internal or external) SD card, start Mobile ODIN and flash away.

! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !

If you use the EverRoot option, Mobile ODIN will root the firmware while you flash it. Checking out that new leaked firmware? No reason to lose root!

Currently supported devices:

Samsung Galaxy S:

- GT-I9000/B/M

- GT-I9003/L

- AT&T;/Rogers Captivate SGH-I896/I897

Samsung Galaxy S2:

- GT-I9100/T/G/M

- SHW-M250S/K

- SC-02C

- AT&T; SGH-I777

- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST

- USCC SCH-R760

Samsung Galaxy S3:

- GT-I9300/T

- GT-I9308

- LTE SHV-E210S

- LTE GT-I9305/T/N

- AT&T;/Canadia SGH-I747/M

- TMOUS SGH-T999

- Sprint/C-Spire SPH/SCH-L710

- VZW SCH-I535 (unlock bootloader !)

- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C

Samsung Galaxy S4:

- LTE GT-I9505

- Sprint SPH-L720

- TMOUS SGH-M919

- USCC SCH-R970

- Canadia SGH-I337M

Google Galaxy Nexus:

- GSM Maguro/Yakju/GT-I9250

- CDMA/LTE Toro/Mysid/SCH-I515 (no cdma radio flashing)

Samsung Galaxy Note

- GT-N7000/B

- GT-I9220

Samsung Galaxy Note 2:

- GT-N7100

- LTE GT-N7105

- AT&T;/Canadia SGH-I317/M

- TMOUS SGH-T889

- Sprint SPH-L900

- VZW SCH-I605 (unlock bootloader !)

- USCC SCH-R950

Samsung Galaxy Note 3:

- SM-N9005

Samsung Galaxy Note 8.0":

- 3G GT-N5100

- Wi-Fi GT-N5110/N5113

- LTE GT-N5120

Samsung Galaxy Note 10.1":

- 3G GT-N8000

- Wi-Fi GT-N8010/N8013

- LTE GT-N8020

Samsung Galaxy Tab:

- Tab 7" GT-P1000

- Tab 7.0 Plus GT-P6200/L, GT-P6210

- Tab 7.7" GT-P6800, GT-P6810

- Tab 10.1" GT-P7500, GT-P7510

- Tab 2 7" GT-P3100, GT-P3110, GT-P3113

- Tab 2 10" GT-P5100, GT-P5110, GT-P5113

Samsung Galaxy 5:

- GT-I5500/B/L/T/M

- GT-I5503/T

- GT-I5508

Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.

For discussion and support:http://forum.xda-developers.com/showthread.php?t=1347899- MANUAL -

Flashing with Mobile ODIN is easy. You start by starting the app and the app will check your system has everything it needs to continue (like root). It may need to download an additional package, so it is advised you have Wi-Fi available.

Now you should see the main Mobile ODIN screen. It will list a set of partitions. Clicking a partition will allow you to select a file from your SD card to flash to that partition. Do not worry about selecting the wrong file - Mobile ODIN will not let you. Separate files (named after the partition) as well as .tar and .tar.md5 files are supported.

From the desktop ODIN you may be used to "PDA", "PHONE", and "CSC" buttons. All three of these buttons have been replaced by the "Open file ..." button. This button will open the file you select from the SD card, and find all the partitions it can flash inside that file. So if you select a .tar file containing kernel and modem, the Kernel and Modem partitions will be set up to use that .tar file for flashing.

Now that we have selected what we want to flash, if you have the Pro version you can proceed to the EverRoot section. The EverRoot options allows you to root your firmware while it is being flashed. Never again will you be without root! Select here which apps you want to inject in the firmware that is being flashed.

Now that we are all done selecting partitions and configuring EverRoot, we continue to "Flash firmware". Mobile ODIN will gather all the information it needs and perform the flash. Before starting, however, it will check that your battery level is over 50%, and if applicable offer to verify MD5 checksums on the files you have selected to flash. If all is well, it will reboot into recovery mode, and flash the firmware you have selected.奥丁是移动设备上的固件闪光选择。只要抛出这些固件文件（内部或外部）SD卡，启动手机ODIN和闪光灯远离。

！您的设备必须植根能够使用移动ODIN。检查下面的列表中，如果您的设备支持！

如果您使用移动ODIN将选项EverRoot，当你闪的时候，根固件。检查新固件泄露？没有理由失去根！

目前支持的设备：

三星Galaxy S：

- GT-I9000/B/M

- GT-I9003 / L

- AT＆T /罗杰斯的Captivate SGH-I896/I897

三星Galaxy S2：

- GT-I9100/T/G/M

- SHW-M250S / K

- SC-02C

- AT＆T SGH-I777

- 斯普林特/处女/升压史诗的4G触摸SPH-D710/VMUB/BST

- USCC SCH-R760

三星Galaxy S3：

- GT-I9300 / T

- GT-I9308

- LTE SHV-E210S

- LTE GT-I9305/T/N的

- AT＆T /加华SGH-I747 / M

- TMOUS SGH-T999

- 斯普林特/ C-石塔SPH/SCH-L710

- VZW SCH-I535（解锁bootloader的！）

- USCC /蟋蟀/ MetroPCS的银河S3 SCH-R530/U/M/C

三星Galaxy S4：

- LTE GT-I9505

- 斯普林特SPH-L720

- TMOUS SGH-M919

- USCC SCH-R970

- 加华SGH-I337M

谷歌Galaxy Nexus的：

- GSM Maguro/Yakju/GT-I9250的

- CDMA / LTE Toro/Mysid/SCH-I515的（没有CDMA无线闪烁）

三星Galaxy Note

- GT-N7000 / B

- GT-I9220

三星银河注意2：

- GT-N7100

- LTE GT-N7105

- AT＆T /加华SGH-I317 / M

- TMOUS SGH-T889

- 斯普林特SPH-L900

- VZW SCH-I605（解锁bootloader的！）

- USCC SCH-R950

三星银河注3：

- SM-N9005

三星Galaxy Note的8.0“：

- 3G GT-N51​​00

- 无线网络连接GT-N51​​10/N5113

- LTE GT-N51​​20

三星Galaxy Note的10.1“：

- 3G GT-N8000

- 无线网络连接GT-N8010/N8013

- LTE GT-N8020

三星Galaxy Tab：

- Tab采用7“GT-P1000

- TAB 7.0加GT-P6200 / L时，GT-P6210

- “7.7”GT-P6800，GT-P6810

- Tab 10.1的“GT-P7500，GT-P7510

- TAB 2 7“GT-P3100，GT-P3110，GT-P3113

- 标签2 10“GT-P5100，GT-P5110，GT-P5113

三星Galaxy 5：

- GT-I5500/B/L/T/M

- GT-I5503 / T

- GT-I5508

闪烁移动ODIN并不会增加自定义内核闪烁计数器或出现黄色警告三角。

讨论和支持：http://forum.xda-developers.com/showthread.php?t=1347899- 手动 -

闪烁移动ODIN是容易的。你开始启动应用程序和应用程序将检查您的系统拥有一切，它需要继续（如根）。它可能需要下载一个额外的包，所以建议你具备Wi-Fi。

现在，你应该看到的主要移动ODIN屏幕。它会列出一组分区。单击分区，将允许你选择一个文件从你的SD卡，闪到该分区。不要担心选择错误的文件 - 移动ODIN不会放过你。支持单独的文件（分区命名），以及焦油和。tar.md5文件。

从桌面ODIN您可使用“掌上电脑”，“手机”，“CSC”按钮。所有这三个按钮被替换为“打开文件...”按钮。此按钮将打开该文件，选择从SD卡中，找到所有的分区，它可以刷里面的那个文件。所以，如果你选择了一个tar文件包含内核和调制解调器的内核和调制解调器分区将被设置为使用。tar文件闪烁。

现在，我们已经选择我们想要的闪烁，如果你有专业版，您可以继续的EverRoot部分。 EverRoot选项允许你以root你的固件，而它被闪过。你再也不会是无根的！这里选择的应用程序要注入的固件中闪过。

现在我们都做选择分区和配置EverRoot的，我们将继续“闪光固件”。手机ODIN将收集所有需要的信息，并进行闪光。然而，在开始之前，它会检查你的电池电量超过50％，如果适用收购来验证MD5校验和您选择的文件到闪存。如果一切顺利，它会重新启动进入恢复模式，刷新固件您选择。